Home › Collaborative robot arms (cobots) › UFACTORY › UFACTORY xArm 6

Image pending — we only use press-kit or licensed images with a recorded rights status.

UFACTORY xArm 6 Shipping

Name: UFACTORY xArm 6
Brand: UFACTORY

By UFACTORY · China · Collaborative robot arms (cobots)

Payload

5 kg (11 lb)

Reach

700 mm (27.6 in)

Repeatability

0.1 mm

Weight

12.5 kg (28 lb)

Price

US$8,399

17 sourced values · 4 not disclosed (81% disclosed)Checked by our QA desk on 2026-09-25Official page

1 value on this page comes from outside the maker (marked Reported or ⚠ Unconfirmed). Each links to its source — treat them with caution until the maker confirms.

Prices and where to buy

We don't earn anything from the links below. If that changes, this notice will say so before the links.

Standard: US$8,399 · official price, Global (UFACTORY online shop, EXW China) · checked 2026-09-25 Official store/page

Prices change often; the maker's page is authoritative. Amazon prices are shown only through Amazon's own links.

Full specifications

Every value shows its confidence: Manufacturer stated by the maker · Verified independently confirmed · Estimate our calculation from official figures · Reported credible media, retailer or trade-show report, not confirmed by the maker · ⚠ Unconfirmed leak, rumour or single source — treat with caution · Not disclosed not published. Every value, whatever its confidence, links to its source. How we source specs.

Launch
Announced	2018-01-01ManufacturerSource: ufactory.cc (2026-09-25)
Status	ShippingManufacturerSource: ufactory.cc (2026-09-25)

Body
Weight	12.5 kg (28 lb)ManufacturerSource: ufactory.cc (2026-09-25)
IP rating	Not disclosedNot disclosedChecked: ufactory.cc (2026-09-25)

Arm
Reach	700 mm (27.6 in)ManufacturerSource: ufactory.cc (2026-09-25)
Axes	6 axesManufacturerSource: ufactory.cc (2026-09-25)
Repeatability	0.1 mmManufacturerSource: ufactory.cc (2026-09-25)
Max tool speed	1 m/s (3.6 km/h · 2.2 mph)ManufacturerSource: ufactory.cc (2026-09-25)
Joint ranges	J1,J4,J6: ±360°; J2: -118°~120°; J3: -225°~11°; J5: -97°~180°⚠ UnconfirmedSource: ufactory.cc (2026-09-25)
Footprint	Not disclosedNot disclosedChecked: ufactory.cc (2026-09-25)
Power consumption	Not disclosedNot disclosedChecked: ufactory.cc (2026-09-25)
Programming	UFACTORY Studio (GUI, graphical/drag-and-drop programming, hand teaching)ManufacturerSource: ufactory.cc (2026-09-25)

Payload
Payload	5 kg (11 lb)ManufacturerSource: ufactory.cc (2026-09-25)Conditions: Rated payload of the arm (stationary, mounted).

Software
SDK	UFACTORY Studio (graphical programming); Python SDKManufacturerSource: ufactory.cc (2026-09-25)
ROS support	ROS and ROS2 supportedManufacturerSource: ufactory.cc (2026-09-25)