RankedRobot
Home › Quadruped robots (robot dogs) › DEEP Robotics › DEEP Lynx M20
Image pending — we only use press-kit or licensed images with a recorded rights status.

DEEP Lynx M20 Shipping

By DEEP Robotics · China · Quadruped robots (robot dogs)

Weight
35 kg (77 lb)
Speed
2 m/s (7.2 km/h · 4.5 mph)
Payload
15 kg (33 lb)
Runtime
2.5 h–3 h
Price
Not published

19 sourced values · 7 not disclosed (73% disclosed)Checked by our QA desk on 2026-09-25Official page

1 value on this page comes from outside the maker (marked Reported or ⚠ Unconfirmed). Each links to its source — treat them with caution until the maker confirms.

Prices and where to buy

We don't earn anything from the links below. If that changes, this notice will say so before the links.

DEEP Robotics hasn't published a price. Enquiries go through the maker's sales team.

Prices change often; the maker's page is authoritative. Amazon prices are shown only through Amazon's own links.

Full specifications

Every value shows its confidence: Manufacturer stated by the maker · Verified independently confirmed · Estimate our calculation from official figures · Reported credible media, retailer or trade-show report, not confirmed by the maker · ⚠ Unconfirmed leak, rumour or single source — treat with caution · Not disclosed not published. Every value, whatever its confidence, links to its source. How we source specs.

Launch
Announced
Status
Body
Dimensions
Length 820 mm × Width 430 mm × Height 570 mmManufacturerSource: deeprobotics.cn (2026-09-25)
Weight
35 kg (77 lb)ManufacturerSource: deeprobotics.cn (2026-09-25)
Form factor
wheeled-legged quadrupedManufacturerSource: deeprobotics.cn (2026-09-25)
IP rating
Mobility
Max speed
2 m/s (7.2 km/h · 4.5 mph)ManufacturerSource: deeprobotics.cn (2026-09-25)Conditions: operating/rated max speed; lab-tested peak is 5 m/s per notes
Stairs
Max stair height 25cm continuous; max single-step obstacle 80cm; max slope 45 degManufacturerSource: deeprobotics.cn (2026-09-25)
Joints & payload
Degrees of freedom
Not disclosedNot disclosedChecked: deeprobotics.cn (2026-09-25)
Payload
15 kg (33 lb)ManufacturerSource: deeprobotics.cn (2026-09-25)Conditions: standard payload as stated
Peak load
50 kg (110 lb)ManufacturerSource: deeprobotics.cn (2026-09-25)Conditions: maximum stated payload
Compute & AI
Processor
Dual octa-core 64-bit industrial processors (16GB+128GB) x2ManufacturerSource: deeprobotics.cn (2026-09-25)
AI performance
Not disclosedNot disclosedChecked: deeprobotics.cn (2026-09-25)
Teleoperation
Not disclosedNot disclosedChecked: deeprobotics.cn (2026-09-25)
Sensors
Cameras
Wide-angle cameras x2ManufacturerSource: deeprobotics.cn (2026-09-25)
LiDAR
96-line LiDAR x2, 360x90 deg, ~860,000 pts/sManufacturerSource: deeprobotics.cn (2026-09-25)
Power
Battery
Not disclosedNot disclosedChecked: deeprobotics.cn (2026-09-25)
Runtime
2.5 h–3 hManufacturerSource: deeprobotics.cn (2026-09-25)Conditions: unloaded to 15kg-loaded range
Charge time
Hot-swappable battery
Not disclosedNot disclosedChecked: deeprobotics.cn (2026-09-25)
Software
SDK
Not disclosedNot disclosedChecked: deeprobotics.cn (2026-09-25)
Commercial
Regions sold
Not disclosedNot disclosedChecked: deeprobotics.cn (2026-09-25)

Compare with

Compare DEEP Lynx M20 side by side

AgiBot D1 UltraShipping
AgiBot · Quadrupeds
Weight
16 kg (35 lb)
Speed
3.7 m/s (13.3 km/h · 8.3 mph)
Payload
5 kg (11 lb)
Runtime
60 min–2 h
Price
US$9,600
ANYbotics ANYmalShipping
ANYbotics · Quadrupeds
Weight
Not disclosed
Speed
0.75 m/s (2.7 km/h · 1.7 mph)
Payload
10 kg (22 lb)
Runtime
90 min–2 h
Price
Not published
Boston Dynamics SpotShipping
Boston Dynamics · Quadrupeds
Weight
33.8 kg (75 lb)
Speed
1.6 m/s (5.8 km/h · 3.6 mph)
Payload
14 kg (31 lb)
Runtime
90 min
Price
Not published
DEEP Lite3Shipping
DEEP Robotics · Quadrupeds
Weight
12–13.5 kg (26–30 lb)
Speed
Not disclosed
Payload
2.5–5 kg (6–11 lb)
Runtime
90 min–2 h
Price
US$2,890

Related news

The news desk launches with the site. Stories tagged DEEP Lynx M20 will appear here.

Spotted an error? Tell us — every correction is logged publicly on our corrections page.